The impact of argon/oxygen low-pressure plasma on shear bond strength between a veneering composite and different PEEK materials

Publication date: Available online 24 June 2017
Source:Dental Materials
Author(s): Andreas Dominik Schwitalla, Friederike Bötel, Tycho Zimmermann, Mona Sütel, Wolf-Dieter Müller
ObjectiveThe aim of the study was to evaluate the impact of low-pressure argon/oxygen plasma with and without previous sandblasting on the shear bond strength (SBS) between dental PEEK compounds and a veneering composite.MethodsOf one type of unfilled PEEK and two pigment powder filled PEEK compounds, forty rectangular plates each were prepared and polished up to 4000 grit. The samples were randomly assigned to four surface pre-treatment groups, each consisting of ten specimens (1. Untreated; 2. Plasma treatment; 3. Sandblasting; 4. Sandblasting+plasma treatment). Plasma treatment was performed for 35min using a low-pressure plasma system with a 1:1 mixture of the process gases argon and oxygen. Surface roughness and water contact angles were recorded. An adhesive (Visio.link, Bredent GmbH & Co KG, Senden, Germany) was applied onto the specimen surfaces and light cured. A mold was used to shape the veneering composite (Vita VM LC, Vita Zahnfabrik, Bad Säckingen, Germany) into a cylindrical form on the sample surface before light curing. SBS was measured after 24h incubation at 37°C in distilled water using a universal testing machine.ResultsThe samples pre-treated according to group 4 (sandblasting and plasma treatment) showed the highest SBS overall, whereas the unfilled PEEK showed the highest SBS (19.8±2.46MPa) compared to the other PEEK materials (15.86±4.39MPa and 9.06±3.1MPa).SignificanceSandblasting and surface activation with low-pressure argon/oxygen plasma in combination with an adhesive causes a favorable increase in shear bond strength, especially on unfilled PEEK material.



from #ORL-AlexandrosSfakianakis via ola Kala on Inoreader http://ift.tt/2rPYgfj
via IFTTT